|
| |
Overview
The DX30 addresses the most significant backup challenges facing IT
professionals: the time required for backups, confidence in creating complete
backups and time to restore data. The DX30 enhances an existing tape backup
system by separating the backup target from the backup archive. The DX30
utilizes the inherent strengths of disk (quick access, high-speed data
transfer, and RAID protection) to improve backup functions. As a result, your
tape library can use its strengths (low cost, ability to write large block
sizes, removable media, and archival stability) to concentrate on what it does
best — archival data storage.
Here's how it works — after installing a DX30, backup jobs are done directly
to the DX30 (the backup target) increasing backup speeds in excess of
216GB/hour. The software platform designed into the DX30 precisely emulates a
tape library (with two to six tape drives), allowing your backup software to
function without modification. The DX30 uses RAID-protected disks to increase
your confidence (beyond 99%) that the backup has been completed correctly and
can be restored when needed.
Features and Benefits
- Data transfer rates in excess of 216GB/hour
- 3TB capacity in 4U
- RAID 5 or RAID 10 protected disks
- Integrates with most tape libraries
- Hot-swappable disk drives
- Universally rack mountable
- Redundant 2 Gigabit Fibre Channel network interfaces
- Gigabit Ethernet interfaces for management and auxiliary
functions
- Browser-based management support
- Emulates an ATL P1000 with two to six DLTtapeTM
drives for plug-and-play software compatibility
- Redundant fans, power supplies, and interfaces for high
availability
- Integrates seamlessly with exisiting backup software
packages
Specifications
Capacity
RAID 5 App. 3TB
RAID 10 App. 2TB
Performance
In excess of 216 GB/hr
Host Interfaces
| Hardware |
Dual 2 Gigabit Fibre Channel (LC
connector)
Dual 10/100/1000-BaseT Ethernet (for management and future features) |
| Software |
SCSI-3 Medium Changer command set
DLT7000 command set (Redundant host interfaces) |
Power Requirements
| Voltage |
100 to 240 VAC |
| Frequency |
47 to 63 Hz |
| Current |
5A @ 115VAC / 2.5A @ 230VAC |
| Power Cord Connector |
IEC 60320 C13 Connector |
| Power Consumption |
575W Max. |
Cabinet Characteristics
| Height |
6.88 in. (175mm) |
| Bezel width |
19.0 in. (482.6mm) |
| Chassis width |
17.5 in. (444mm) |
| Depth |
25.5 in. (647.7mm) |
| Weight |
115 lbs |
Environmental limits, Operating
| Humidity |
20% to 80%, noncondensing |
| Temperature |
50°F to 95°F (10°C to 35°C) |
| Altitude |
-984 to 10,000 feet (-300 to 3,048m) |
| Shock |
20 G (2ms half-sine) 10G (11ms half-sine) |
| Vibration |
0.25 Grms (Random)
0.5 G Swept Sine (5-500-5 Hz) No Errors
1.0 G Swept Sine (5-500-5 Hz) No Data Loss |
Heat
Dissipation |
1962 BTU/Hr. (Typical) |
Environmental limits, Non-operating (storage & shipping)
| Humidity |
10% to 90%, noncondensing |
| Temperature |
-40°F to 150°F (-25°C to 60°C) |
| Altitude |
-984 to 39,370 feet (-300 to 12,000m) |
| Shock |
75 G (11 ms half-sine pulse)
200 G (2ms half-sine pulse) |
| Vibration |
0.25 Grms (Random) |
Agency Approvals
| Safety |
UL 1950 Listed, CSA, C22.2-No. 950, (73/23 EEC),
EN60950, EN60825, GS-Mark |
| Emissions |
FCC Part 15 Class A, ICES-003, CE Mark (89/336 EEC),
VCCI Class A, C-Tick, BSMI |
|
